FAQs
Certified by NAMI, Miami/Dade approved and approved by the Florida Building Commission.
We are an Emtek dealer and recommend tubular locks through this brand.
Each entry unit comes with a Transferable Limited Lifetime Warranty.
The doors come as a pre-hung unit with a custom made steel/iron frame. It supports the weight of the door and allows ease of installation.
Our doors are hand-forged and custom made, manufactured with 11-gauge tubular steel/iron.
Extension flush bolts are used on double door units. The flush bolts are the mechanisms that lock the passive door of a double door unit.
Insulated with two-stage polyurethane foam.
Pemko weather stripping and self-adhesive weather strip are used around the door frame and the glass frame (if door has operable glass panels) making the door weather tight.
Factory installation available throughout the Southeast United States. This includes the removal and disposal of the current entry unit.
There are two options on the swing of the doors: In-swing and Out-swing.
The door thickness is 2".
The Door frames are 1 1/2" wide x 4 1/2" deep. The frames can be made to other specifications.
Weight will vary depending on measurements and design. A 3' wide by 8' tall door weights approximately 220 pounds.
Wrought Iron of 1/2" to 5/8" is used in scroll design. Depending on intricacy of design and scale other with other thicknesses can be used.
Various paint colors and finishes are available. Because the doors are hand painted, slight variations in the colors may occur.
Tempered glass is used on all door units for safety measures (non-impact). Other glass options are available to meet customer's needs including laminated impact glass.
Pricing is determined by the size of the unit and type of design selected.
Custom Iron Handle sets are available and meet all of our engineered certifications.
Production times vary according to project and will be provided to you at estimate.
Standard hardware: 2 1/8" boring, 2 3/8" backset, 5 1/2" center to center.
Production times vary according to project and will be provided to you at estimate.
Hardware of your choice must be known so we can bore holes. Templates need to be provided if specifications are different than standard.
Phone:
(407) 339-2555
(888) 932-4283
Address:
671 Newburyport Ave, Altamonte Springs, FL 32701
Hours of Operation:
Mon - Fri: 8 AM - 5 PM
Saturday: Closed
Sunday: Closed
Connect with Us on social media: